Self Aligning Ball Bearings

Contact Now

In a self-aligning bearing, the inner ring has two raceways and the outer ring has a single spherical raceway with its center of curvature coincident with the bearing axis. This allows the axis of the inner ring, balls and cage to deflect around the bearing center to automatically correct misalignment caused by housing and shaft machining or installation error.
A self-aligning bearing is recommended when the alignment of the shaft and housing is difficult or when the shaft may bend during operation.
Normal mounting and handling procedures for a cylindrical bore bearing should be followed. For the tapered bore, special care must be taken to ensure the bearing is driven up the taper the appropriate amount. Because matching the bearing to the specific application is critical, it is important to verify your application need with your selected vendor.

NSK mm2100 Bearing

2700 rpm 220000 N
56.00 mm 163000 N

SKF 2202E Self Aligning Ball Bearings

0.15 mm 5850 N
9360 N 9.00 mm

SKF 1213E Self Aligning Ball Bearings

35.8 kN 7500 r/min
12 kN 60 mm

RHP BEARING 2306MC3 Self Aligning Ball Bearings

2700 rpm 220000 N
56.00 mm 163000 N

NSK 2307KTN Self Aligning Ball Bearings

27.94 mm 22.225 mm
1/8 NPT 98.425 mm

NSK 2205EKTN Self Aligning Ball Bearings

2.3750 in 0.4375 in
Stainless Steel 3/4 in

NSK 2308J Self Aligning Ball Bearings

19.5 mm 4 mm
800 mm 22.3 mm

NSK 2312KJ Self Aligning Ball Bearings

52 mm 0.129 kg
30 min 15 000 min-1

NSK 2305J Self Aligning Ball Bearings

214 kN 3 mm
2 mm 150 mm

NSK 2307J Self Aligning Ball Bearings

29600 N 0 rpm
55.000 mm 8200 rpm

NSK 2212KJ Self Aligning Ball Bearings

60.579 mm 539.877 mm
HMVC 92E PL 92

NSK 1210 KTNGC3 Self Aligning Ball Bearings

25.4 kN 22.225 mm
149.1 N·m B10724-89
1/15